WaveWare Adaptive AlphaNet - Manual (Page 41)

Step-by-step tutorial in setting up connection devices, sites, and groups
2 — Installing AlphaNET™ 3.0 software and setting up sites 41
24. N
ext, enter information on the Sign Info tab:
Table 14: Shipping setup (2 of 4): Site Editor (Sign Info) window
Item Name Directions
A
Tone on
Receipt See “Sales setup (2 of 4): Site Editor (Sign Info) window”
on page 34.
B Address List
The address of the Shipping sign can be left at its factory
default value of 00:
C Counter File... See “How to edit a counter file” on page 81.
D
Automode
File…
Choose an automode table, if desired. (Compatibility on
the Site Info tab must be Alpha 2.0 or Alpha 3.0 for
Automode Table… to be available.)
See “How to create and use a custom automode
sequence” on page 107 for more information.
E Tune File
Signs in the address list can play a tune file each time
they receive a message. To do this, select Tone on
Receipt >Tune File. Then browse and select one of the
pre-programmed tune files. Only available on an
AlphaPremiere™ 9000 sign.
F Duration In seconds, the length of time each beep will sound.
G Repeat
The number of times the beep (or series of beeps) will
sound.
H
Extended
Memory
Used for large file transmissions, such as when sending
graphics to a display sign. Must be selected when
sending to an AlphaPremiere™ 9000 or AlphaEclipse™
sign.
D
B
C
E
A
F
G
H
Shipping 00