WaveWare Adaptive AlphaNet - Manual (Page 62)

How to send a message to a sign
62 3 — Creating and sending messages
How to send a message to a sign
What happens when messages are sent to a sign?
Messages are sent to signs using either Message Editor or Site
Manager. One message at a time is sent from Message Editor, and it
erases all other messages in the sign’s memory. This one message, then,
plays over and over.
More than one message at a time can be sent from Site Manager, and
they erase all other messages in the sign’s memory. These new messages
are then displayed one after the other.
When a single message is sent with Message Editor: When more than one message is sent with Site Manager:
After creating a message in Message Editor,
select to send the message to one or more sites.
After creating messages in Message Editor and then saving them,
open Site Manager. Select the sites to which you want to add
messages, then click .
ANNIV1.MSW ANNIV1.MSW
BIRTH1.MSW
CUSTOM.MSW
Then select to send the messages.
1 message repeated
3 messages repeated
Each message packet
sent includes the date
and time from the
sending PC. The clock
inside the sign will be
updated, even if the
message doesn’t
include the date or
time.