AMETEK BPS Series Programming Manual - Manual (Page 141)

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power
Manual P/N 7003-961 Rev. AA 141
6. Programming Examples
6.1 Introduction
This chapter contains examples on how to program the AC/DC source. Simple examples
show you how to program:
• Output functions such as voltage, frequency, and phase
• The transient waveform generator
• Internal and external triggers
• Measurement functions
• User-defined
waveforms
• The status and protection functions
The examples in this chapter use generic SCPI commands. See chapter 2 for information
about encoding the commands as language strings. Where appropriate, optional commands
are shown for clarity in the examples.