AMETEK BPS Series Programming Manual User Manual
Page 42
AMETEK Programmable Power
BPS / MX / RS Series SCPI Programming Manual
42
Manual P/N 7003-961 Rev AA
4.2.3
Current Measurement
CALibrate:MEASure:CURRent[:AMBient][:AC][:FSCale] <NRf>
This command initiates the calibration of the AC current measurement at full scale and at
ambient temperature.
Command Syntax
CALibrate:MEASure:CURRent[:AMBient][:AC][:FSCale]
Parameters
<NRf> (actual load current measured with external device)
Examples CAL:MEAS:CURR
11.5
Query Syntax
CALibrate:MEASure:CURRent?
Returned Parameters
<NR2> (value range -1000 to +1000)
Related Commands
CALibrate:MEASure:CURRent:TEMPerature[:AC][:FSCale]
CALibrate:MEASure:CURRent[:AMBient]:DC[:FSCale] <NRf>
This command initiates the calibration of the DC current measurement at full scale and at
ambient temperature.
Command Syntax
CALibrate:MEASure:CURRent[:AMBient]:DC[:FSCale]
Parameters
<NRf> (actual load current measured with external device)
Examples CAL:MEAS:CURR:DC
11.5
Query Syntax
CALibrate:MEASure:CURRent:DC?
Returned Parameters
<NR2> (value range -1000 to +1000)
Related Commands
CALibrate:MEASure:CURRent:TEMPerature:DC[:FSCale]
CALibrate:MEASure:CURRent[:AMBient]:DC:ZERO <NRf>
This command initiates the offset adjustment of the DC current measurement at ambient
temperature.
Command Syntax
CALibrate:MEASure:CURRent[;AMBient]:DC:ZERO
Parameters
<NRf> (0 or desired offset value)
Examples CAL:MEAS:CURR:DC:ZERO
Query Syntax
CALibrate:MEASure:CURRent:DC:ZERO?
Returned Parameters
<NR1> (value range -127 to +128)
Related Commands
CALibrate:MEASure:CURRent:TEMPerature:DC:ZERO
CALibrate:MEASure:CURRent:TEMPerature[:AC][:FSCale] <NRf>
This command initiates the calibration of the AC current measurement at full scale and at
elevated temperature.
Command Syntax
CALibrate:MEASure:CURRent:TEMPerature[:AC][:FSCale]
Parameters
<NRf> (actual load current measured with external device)
Examples CAL:MEAS:CURR:TEMP
11.5
Query Syntax
CALibrate:MEASure:CURRent:TEMP?
Returned Parameters
<NR1> (value range -1000 to +1000)
Related Commands
CALibrate:MEASure:CURRent[:AMB][:AC][:FSCale]