Guralp Systems CMG-6TD - Manual (Page 48)

CMG-6TD Installing the 6TD
3. Type the IP address of the 6TD, a colon (“:”) and the output port that
you chose when configuring the network interface. If you accepted the
defaults, this will be port 10,002. The entry should look like
92.168.33.2:10002
Click .
4. After a short wait, an entry for the instrument should appear in the
pane. Right-click on the entry and select Connect.
5. If the connection is successful, you should see blocks appearing in the
Block Rx pane, and streams will appear in Scream!'s main window.
Close the Network Control window.
MAN-T60-0002 48 Issue F - February 2014