Guralp Systems CMG-6TD - Manual (Page 6)

CMG-6TD Preliminary Notes
1 Preliminary Notes
1.1 Proprietary Notice
The information in this document is proprietary to Güralp Systems Limited
and may be copied or distributed for educational and academic purposes but
may not be used commercially without permission.
Whilst every effort is made to ensure the accuracy, completeness and
usefulness of the information in the document, neither Güralp Systems
Limited nor any employee assumes responsibility or is liable for any
incidental or consequential damages resulting from the use of this document.
1.2 Warnings, Cautions and Notes
Warnings, cautions and notes are displayed and defined as follows:
Caution: A yellow triangle indicates a chance of damage to or
failure of the equipment if the caution is not heeded.
Note: A blue circle indicates indicates a procedural or advisory
note.
1.3 Manuals and Software
All manuals and software referred to in this document are available from the
Güralp Systems website:
www.guralp.com unless otherwise stated.
1.4 Conventions
Throughout this manual, examples are given of command-line interactions.
n these examples, a fixed-width typeface will be used:
Example of the fixed-width typeface used.
Commands that you are required to type will be shown in bold:
Example of the fixed-width, bold typeface.
Where data that you type may vary depending on your individual
configuration, such as parameters to commands, these data are additionally
shown in italics:
Example of the fixed-width, bold, italic typeface.
Putting these together into a single example:
System prompt: user input with variable parameters
MAN-T60-0002 6 Issue F - February 2014