Hypertherm Powermax30 XP Service Manual - Manual (Page 18)

18 Powermax30 XP Service Manual 808150 Revision 1
1 – Specifications
 Carrying strap
 Operator Manual
 Safety and Compliance Manual
 Quick Setup Card
 For details on how to select the right set of consumables for a given cutting job, see
Choose the consumables on page 32.
Additional items may also ship with your Powermax30 XP depending on the configuration that you ordered, such as
instructional setup materials, a carrying case, leather cutting gloves, or protective glasses.
CSA units ship with a 120 V/15 A (NEMA 5-15P) adapter and a 240 V/20 A (NEMA 6-50P) adapter that connect to the
NEMA twist lock-style 240 V/20 A (NEMA L6-20P) plug wired to the power supply. CE and CCC units ship without a
plug on the power cord. See
Power cord considerations on page 26 for more information.
You can order additional consumables and accessories – such as the carrying case, carrying strap, and a circle cutting
guide – from any Hypertherm distributor. See the
Parts section on page 185 for a list of spare and optional parts.
Power supply dimensions
System weights
The following system weights include the hand torch with 4.6 m (15 foot) torch lead, a 4.6 m (15 foot) work lead with
ground clamp, and a 3.0 m (10 foot) power cord:
 CSA systems: 9.7 kg (21.4 pounds)
 CE and CCC systems: 9.5 kg (21.0 pounds)
356 mm
(14 inches)
140 mm
(5.5 inches)
292 mm
(11.5 inches)
254 mm
(10 inches)