Nevion Multicon - Manual (Page 17)

Specifications 17
ID: man-multicon Multicon Manual Rev. L
• MRP (IP)
• NCB Compact (Serial)
• NCB Sublime (Serial)
• Thomson/Grass Valley Native (IP and serial)
• Leitch PassThru (IP and serial)
• Pro-Bel SW-P-02 (IP and serial)
• Triton (serial)
This list is valid for Multicon firmware 3.8.0 (or newer). To configure a Multicon system with these
protocols also requires Nevion Configurator 4.4.0 (or newer).
Further information concerning the level of support for each protocol is provided in Appendix A .
Note: Note that the availability of these protocols depends on the licensing
of the Multicon product.
5.2.2 SNMP
Multicon supports SNMP version 1, 2c or 3 over UDP, following SMI version 2.0 according to
relevant RFCs.
RFC1157
Case, J., M. Fedor, M. Schoffstall and J. Davin, “The Simple Network Management Protocol”,
STD 15, RFC 1157, May 1990.
RFC2578
McCloghrie, K., Perkins, D. and J. Schoenwaelder, “Structure of Management Information
Version 2 (SMIv2)”, STD 58, RFC 2578, April 1999.
RFC1901
The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, “Intro-
duction to Community-based SNMPv2”, RFC 1901, January 1996.
RFC2574
Blumenthal, U. and B. Wijnen, “The User-Based Security Model for Version 3 of the Simple
Network Management Protocol (SNMPv3)”, RFC 2574, April 1999.
The following security features are supported:
• User defined community strings (v1 or v2c)
• User based Security Model (v3 only)
• Possible to turn off v1/v2c support.