Nevion Multicon - Manual (Page 65)

Hardware Information 65
ID: man-multicon Multicon Manual Rev. L
2. Slide the CF card out of its socket, and insert the new CF card into the socket.
3. Insert the controller card into its slot, according to the description earlier in this manual.
12.5.2 MicroSD card (Mk4 only)
If it is necessary to remove and/or insert a MicroSD card, the following must be done:
1. Remove the controller card from its slot, according to the description earlier in this man-
ual.
2. Push the MicroSD card to release from its socket, and insert the new MicroSD card into
the socket. Push it to make it stay.
3. Insert the controller card into its slot, according to the description earlier in this manual.
12.6 Battery (Mk2 only)
If it is necessary to remove and/or insert a battery, the following must be done:
Figure 12.7 Battery on the controller card
1. Remove the controller card from its slot, according to the description earlier in this man-
ual.
2. Slide the battery out of its socket, and insert the new battery into the socket.
3. Insert the controller card into its slot, according to the description earlier in this manual.