Nevion Multicon - Manual (Page 45)

Flashlink Web Interface 45
ID: man-multicon Multicon Manual Rev. L
Figure 8.6 Flashlink general configuration
8.4.2 Rack Labels
A label may defined for each frame in the Flashlink system. These will be shown on the Flashlink
main overview page.
8.4.3 Stored System Configurations
To create a stored system configuration simply type in a name for the system configuration and
click Save. A previously saved configuration may be restored by selecting this configuration and
clicking on Load.
Figure 8.7 Flashlink stored configurations
Configuration names should not contain any special characters or whitespace. The configuration
files are stored under the configs directory on the CF card, in a directory with the same name as
the stored setup.
For setup of multiple cards with identical or similar setups, this mechanism can be used to simplify
the process. Files with a sav suffix are the actual configuration, while lab suffix files are the card
labels. The number before the suffix is the card position number, where 00 is card 1 in rack 0, and
79 is card 10 in rack 7.