Nevion Multicon - Manual (Page 76)

Protocol Specifications 76
ID: man-multicon Multicon Manual Rev. L
• Data bits: 8
• Stop bits: 1
TCP/IP settings:
• Northbound (host):
− Listens for connections on port 23 with telnet authentication
− Username: leitch
− Password: pt
− Listens for connections on port 5023 without user authentication
• Southbound (client):
− Connects to client using telnet port 23
− Username and password are configured in Nevion Configurator
Multicon supports the following commands for northbound interfaces:
Command Name Comments
00 DISABLE_REPORTING
01 ENABLE_REPORTING
02 PRESET_CLEAR
03 PRESET_EXECUTE
04 PRESET_XP
16 PRESET_REQUEST_XP
17 PRESET_REQUEST_LEVEL
05 XP_REQUEST_LEVEL
06 XP_REQUEST_OUTPUT
07 XP_LOCK
08 XP_PROTECT
09 XP_RESET
10 XP_DIRECT_TAKE
11 FRAME_SIZE
12 DEVICE_INFORMATION
13 ALARM_REQUEST
14 DEVICE_MSG1
15 DEVICE_MSG2
Configuration options for level mapping and device ID in Nevion Configurator. Address is used
in Leitch protocol, level is the level number used in Multicon.