Nevion Multicon - Manual (Page 54)

Web Control Interface 54
ID: man-multicon Multicon Manual Rev. L
Note: The maximum recommended size for matrixes is 64x64. Although
larger levels is possible, but are not practical to manage in this view as
scrolling will typically be necessary.
9.3 Salvo View
Figure 9.4 shows the new Salvo View for executing salvos available in the system.
Figure 9.4 Web control salvo view
Salvos are organized into salvo groups in a Multicon system. When hovering the mouse pointer
over the salvo icon, a list of available salvo groups is presented. After selecting the right salvo
group, a list of the salvos in this group is presented.
The following information is shown for a salvo:
• Configured name (label) for the salvo.
• Configured descriotion for the salvo.
• Activation status for the salvo (inactive or active). A salvo is active if all settings in the
salvo matches the current state of the included routers or devices.
• Lock state for the salvo (lock, protect or unlock).
To activate a salvo first select the salvo and click Take. Lock and protect of a salvo is performed by
selecting the salvo and then clicking the Lock or Protect buttons. Unlock is performed in a similar
way.
Note: Lock or protect of salvo affects all settings included in the salvo.