Nevion Multicon - Manual (Page 26)

Operation 26
ID: man-multicon Multicon Manual Rev. L
Figure 6.5 Nevion Configurator system overview
If your Multicon controller is not assigned to a system:
1. Open Nevion Configurator. When the Open / create system dialog appears, click the
Create system tab.
Figure 6.6 Nevion Configurator create system
1. Enter a System name and optionally a System description. Click OK.
2. A new empty system is created. Your Multicon controller should be listed under Uncon-
figured devices on the left hand side.
3. Select the Multicon controller you want to include in the system and drag it into the sys-
tem overview.
1. Click upload from the menu bar. The Multicon controller is added now added as the
only device in the system.