Nevion Multicon - Manual (Page 39)

Flashlink Web Interface 39
ID: man-multicon Multicon Manual Rev. L
Figure 8.1 Flashlink Card view
Each of the different modules in the modular Flashlink range has a dedicated icon, which will
appear in the corresponding position of the frame.
In this view the current module that is view is highlighted while the other modules in the same
frame are dimmed.
The GYDA Web interface has three different pages for each module as seen at the bottom of the
page.
8.2.1 Information Page
Figure 8.3 shows the contents of the module information page for the Flashlink AV-HD-XMUX
module. It consists of a module block diagram that is dynamically updated based on signals
received by the module and configuration of the module. For instance if the embedder matrix is
reconfigured then the picture will be updated accordingly.
The page also includes status parameters as reported by the module and the current alarms active
on this module. The information on the module information page is updated every second.