Nevion Multicon - Manual (Page 51)

Web Control Interface 51
ID: man-multicon Multicon Manual Rev. L
9 Web Control Interface
Multicon 4.0 introduces a new Web Control feature (Multicon OPT-WC) that may be used to con-
trol routers and matrixes in Flashlink from the Web interface.
When enabled the Web Control feature adds three new views to the Multicon web page:
• List View to control routers from a list of sources and destinations
• Matrix View to control routers from a matrix with sources and destinations
• Salvo View to execute salvos that are available in the Multicon system
Note: Web Control feature is not restricted to traditional router con-
trol and may also be used to control Flashlink matrixes (e.g. embed-
der/dembedder) and to execute salvos with Flashlink parameters.
9.1 List View
Figure 9.1 shows the new List View with available inputs and outputs from the selected routing
level. The List View also supports virtual routing tables in addition to physical levels.
Figure 9.1 Web control list view
The following information is shown for an input:
• Configured name (label) for the input.
• Configured description for the input.