Nevion Multicon - Manual (Page 75)

Protocol Specifications 75
ID: man-multicon Multicon Manual Rev. L
Command Name Comments
01 INTERROGATE Responds with 03-TALLY
02 CONNECT Responds with 04-CONNECTED
03 TALLY
04 CONNECTED
05 CONNECT_ON
06 GO
12 CON_ON_GO_ACK
13 GO_DONE_ACK
In addition, the northbound interface has some response options:
Multicon is using the following commands for southbound interfaces:
Command Name Comments
01 INTERROGATE Responds with 03-TALLY
02 CONNECT Responds with 04-CONNECTED
03 TALLY
04 CONNECTED
65 EXT_INTERROGATE Responds with 67-EXT_TALLY
66 EXT_CONNECT Responds with 67-EXT_CONNECTED
67 EXT_TALLY
68 EXT_CONNECTED
Please also refer to Snell Pro-Bel SW-P-02 protocol documents.
A.5 Leitch Pass-Through
The Leitch Pass-Through protocol is supported on TCP/IP and serial (RS232/RS422).
Serial port settings (default):
• Port mode: RS232
• Baud rate: 9600
• Parity: None