RLE FMS V.1.13 - Manual (Page 149)

rletech.com FMS User Guide 149
4 Advanced Communications - Modbus, BACnet, and Telnet
If you select an Bacnet register to configure, you’ll see options similar to the ones listed
below:
Figure 4.12 Individual Bacnet Register Configuration Screen
Option Description
Switch View Toggle this option to view either the Modbus Register, SNMP
Object, or BACnet Instance
Submit Changes
Button
Click this button to save any changes entered on the page. If you
access another page, or press the <<Prev or Next>> links without
clicking the Submit Changes button, all your changes will be lost.
Unit Enter the Slave Unit Number. This is not the Slave address, but the
Slave Unit Number shown on the Slave Unit Configuration page;
see section 3.4.25, “Modbus/SNMP/BACnet Slave Units” on
page 104 .
Register Acquisition Designate how the register should be acquired.
Table 4.8 Individual Bacnet Register Configuration Options