RLE FMS V.1.13 - Manual (Page 222)

222 FMS User Guide 800.518.1519
I RADIUS and LDAP
Two other RADIUS server files contain generic configuration data. The users.conf file may
contain some default passwords, and the cliens.conf file may specify one secret for a network
of clients.
Option Description
Authentication Use the drop down menu to select either RADIUS or LDAP
authentication.
Server IP Address Enter the IP address of the RADIUS or LDAP server.
RADIUS Secret Enter the RADIUS secret. The secret is used between the
RADIUS client and the RADIUS server to encrypt passwords.
The secret is administered by the server and must be known
by the client.
LDAP Binding Binding is locked as Anonymous. This field is uneditable.
LDAP Authorization Designate whether LDAP users will have read only or read/
write access.
LDAP baseObject Enter the LDAP baseObject as defined by the LDAP server.
LDAP Filter Enter an LDAP filter for the username.
Default: uid
LDAP Attribute Enter an LDAP attribute for the user password.
Default: userPassword
User Log The user log displays the last eight logins. Each user
password is cached for one hour.
Delete User Cache Button Press this button to clear the user cache and clear any cached
user passwords.
Test User Names and Passwords
User names and passwords can be tested through this option. Enter the appropriate
information and click the Server Test button.
Username/Ldap Filter Enter the RADIUS username or LDAP filter.
Radius Password Enter the RADIUS password.
Server Test Button Click the button to test the usernames and passwords.
Last Server Test Results The results from the server and the authorization level will be
displayed.
Dictionary Entry Some RADIUS servers will need modified files to support the
FMS. The RADIUS server will need to have a dictionary entry
added for RLE. RADIUS uses the vendor’s SNMP enterprise
number as the vendor ID. The RLE entry can be cut and
pasted from the RADIUS configuration page.
User Files Some RADIUS servers will need modified files to support the
FMS. The RADIUS server will need to have the users file to
contain the user names, passwords, and service type
(authorization levels).
Table I.1 RADIUS/LDAP Settings