RLE FMS V.1.13 - Manual (Page 27)

rletech.com FMS User Guide 27
2 Getting Started
2.2.3 Relay 1 and 2 Connections
Relay outputs may be used to unlatch doors, signal annunciators, signal IP cameras, and to
turn on auxiliary equipment such as exhaust fans. Relay outputs are form c (spdt). Refer to
specifications in Appendix D, “FMS Accessories Wiring” on page 191 , for relay contact
ratings. Relays may be configured, through the FMS for Normally Open (NO—unsupervised
or normally de-energized), or Normally Closed (NC—supervised or normally energized)
operation; see Figure 2.5 for examples.
Figure 2.5 Relay Output Wiring Examples