RLE FMS V.1.13 - Manual (Page 53)

rletech.com FMS User Guide 53
3 Web Interface Configuration
Note Press the Submit Changes button when done to save all changes.
Text Direction Used for graphical mapping - decide if you’d like the text on the
map for this object (temperature reading, humidity reading, sensor
value, etc.) to be horizontal or vertical.
Map Coordinate Fine tune the location of the object on the map. Refer to “Facility
Mapping” on page 129 for further information.
Graphical Mapping Designate the device’s location on the FMS graphical map.
Test Map View the mapped location of the point you’re currently configuring.
Digital Input Color -
Active and Inactive
Inputs configured for Digital Status do not trigger notification.
Instead, use this option to set the display color for Digital Status
points on the Main Menu when the input in its inactive state, and
also when it is turned on to its active state.
The options include red, gold, magenta, gray, and green.
Typically, points are configured to be green in their inactive state
and then to turn red on alarm.
Option Description
Table 3.3 FMS Main Board Configuration Options