RLE FMS V.1.13 - Manual (Page 170)

170 FMS User Guide 800.518.1519
7 Point-to-Point Protocol
7.2. Configure the PC
Now the user is ready to configure the PC they will be dialing in from. These directions were
written from a Windows XP machine. To configure the PC:
1 Click on Start, Control Panel, then Network. Select New Connection.
2 When the Internet Properties window appears, select the Connections tab at the top of the
window and click on the Setup button to start the New Connection Wizard.
3 Click the Next button to begin the Wizard.
4 Select Connect to the Internet and click the Next button.
5 Select the Set up my connection manually button and click Next.
6 Select the Connect using a dial-up modem button and click Next.
7 Type “Falcon” as the name of the Internet Service Provider (ISP) in the space provided and
click Next.
8 Enter the phone number of the phone line that connects to the FMS. Click the Next button.
9 Enter the FMS Modem User name and Password and click Next.
10 Add a shortcut to the desktop. Click the Finish button. Use this desktop shortcut to
establish a PPP connection with the FMS.