HEIDENHAIN MANUALplus 4110 - Manual (Page 135)

HEIDENHAIN MANUALplus 4110 135
4.5 Recessing c
y
cles
Recessing radial/axial, finishing
Call the recessing menu.
Select the "Recessing, radial" cycle (see figures at
right).
Select "Recessing axial" (see figures on the following
page).
Press the Finishing run soft key.
The cycle finishes the number of recesses defined in Q. The
parameters X/Z to X2/Z2 define the first recess (position, recess depth
and recess width).
Cycle parameters
 X, Z starting point
 X2, Z2 contour end point
 DX, DZ distance to subsequent recess with respect to the
preceding recess
 Q number of recess cycles —default: 1
 T tool number
 S spindle speed / cutting speed
 F feed per revolution