HEIDENHAIN MANUALplus 4110 - Manual (Page 478)

478 9 Examples
9.2 ICP Example "Thr
eaded St
ud"
Contour element 7
The next connecting contour element is a chamfer.
The only parameter that needs to be defined is the
"chamfer width B."
When you program the chamfer, the control does not
yet know the subsequent contour element which
connects to the chamfer. The chamfer and the
preceding linear element are therefore considered
"unsolved elements." MANUALplus displays the
symbols for these elements below the graphics
window and depicts the preceding horizontal line in
gray (color for unsolved elements).