HEIDENHAIN MANUALplus 4110 - Manual (Page 230)

230 4 Cycle Programming
4.9 Dr
illing/Milling P
a
tt
er
ns
Drilling/milling pattern circular, axial
Call the drilling menu.
Select "Drilling axial " (see figure at upper right).
Select "Deep-hole drilling, axial " (see figure at center
right).
Select "Tapping, axial " (see figure at lower right).
Press the Pattern circular soft key.
Call the milling menu.
Select "Slot axial " (see figure at top of next page).
Select "ICP contour, axial" (see middle figure on next
page).
Press the Pattern circular soft key.
Press "Pattern circular" to machine hole patterns or figure patterns in
which the individual features are arranged at a regular spacing in a
circle or circular arc on the face.
Drilling pattern circular, axial
Milling pattern circular, axial