HEIDENHAIN MANUALplus 4110 - Manual (Page 528)

528 10 Tables and Overviews
1
0
.3 T
e
c
hnical Inf
o
rm
ation
10.3 Technical Information
Specifications
Control design „ Contouring control with integrated motor control
„ 2 controlled axes X/Z, controlled spindle and 1 driven tool
Display „ Integrated 10.4-inch TFT color flat-panel display
„ Highlighted actual-value and status displays
„ Load display for spindle
„ Error messages in plain language
Program memory „ Hard disk > 4.5 GB
Input resolution and display step „ X axis: 0.5 µm, diameter: 1 µm
„ Z axis: 1 µm
„ C axis: 0.001°
Interpolation „ Straight line in 3 principal axes (max. ±10 m)
„ Circle in 2 axes (max. ±100 m)
Feed rate „ Max. 9.999 m/min or max. 9.999 mm/rev.
„ Constant cutting speed
„ Maximum threading feed rate up to 99.999 m/rev.
„ Feed rate with chip breaking
„ Maximum rate of rapid traverse 99.999 m/min
Spindle „ 0 to 9 999 rpm
Axis control „ Integrated digital drive control for synchronous and
asynchronous motors
„ Position control clock pulse: < 3 ms
„ Speed control: < 0.6 ms
„ Current control: < 0.1 ms
Spindle speed „ Speed: 0 to 9999 rpm
Error compensation „ Backlash / reversal error
„ Screw pitch error
„ Slope angle of an oblique axis
„ Temperature
Integral PLC „ 512 KB program memory
„ 124 KB data memory
Data interface „ RS 232-C, max. 38.4 kilobaud
„ RS 422-C, max. 38.4 kilobaud
„ Ethernet 10 Mb
Operating temperature „ 0 °C to 45 °C