HEIDENHAIN MANUALplus 4110 - Manual (Page 90)

90 4 Cycle Programming
4.3 Single Cut Cy
cles
Approach the tool change position
Call the single-cut menu.
Select the "Rapid traverse positioning" cycle.
Activate the T-Change approach function
The tool moves at rapid traverse from the current position to the tool
change position (see “Defining the tool change position” on page 52).
Cycle parameters
 Q sequence —default: 0
„ 0: Diagonal path of traverse
„ 1: First X, then Z direction
„ 2: First Z, then X direction
„ 3: X direction only
„ 4: Z direction only
 T tool number: After reaching the tool change position,
MANUALplus switches to the tool indicated in "T."