HEIDENHAIN MANUALplus 4110 - Manual (Page 416)

416 7 Tool Management Mode
7.
3 T
o
ol T
e
xts
7.3 Tool Texts
A description or designation makes it easier to find a
specific tool whenever you need it again. You can
describe each tool by an identification number or a
general designation, depending on your method of
organization.
Connections:
„ The descriptions are managed in the tool text list.
Each entry is preceded by a "Q number."
„ The parameter "Tool text Q" contains the reference
number for the "tool text" list. The text is then
displayed in the tool list.
You can navigate within the tool list with the arrow
keys and "PgUp/PgDn" to check the entries.
Create entry
 Position the cursor on a free space.
 Press Change text.
 MANUALplus displays the alphanumeric keyboard
for entering the text.
Edit entry
 Position the cursor on the text entry.
 Press Change text.
 MANUALplus displays the alphanumeric keyboard
for editing the text.
Copy entry
 Position the cursor on the text entry.
 Press Copy.
 Position the cursor on a free space.
 Retrieve the copied text by pressing Insert.
Relocate entry
 Position the cursor on the text entry.
 Press Cut out.
 Position the cursor on a free space.
 Retrieve the copied text by pressing Insert.
Delete entry
 Place the cursor on the text entry to be deleted.
 Press Delete.