HEIDENHAIN MANUALplus 4110 - Manual (Page 228)

228 4 Cycle Programming
4.9 Dr
illing/Milling P
a
tt
er
ns
Drilling/milling pattern linear, axial
Call the drilling menu.
Select "Drilling axial " (see figure at upper right).
Select "Deep-hole drilling, axial " (see figure at center
right).
Select "Tapping, axial " (see figure at lower right).
Press the Pattern linear soft key.
Call the milling menu.
Select "Slot axial " (see figure at top of next page).
Select "ICP contour, axial" (see middle figure on next
page).
Press the Pattern linear soft key.
Press "Pattern linear" to machine hole patterns or figure patterns in
which the individual features are arranged at a regular spacing in a
straight line on the face.
Drilling pattern linear, axial
Milling pattern linear, axial