Yaskawa Ladder Works Operation Manual - Manual (Page 105)

4.2 REPLACE
4-9
4.2 REPLACE
The specified character string is found and replaced in the ladder program.
1.
Select Search (S) - Replace (P) of the menu or from the pop-up menu.
< Key Operation >: Ctrl＋H
2.
The dialog box is displayed.
Input the found character string, the replaced character string, and the condition
3.
Select the Replace button and a specified character string is found according the specified
condition and replaced. The cursor is moved to next found position after replaced and it is
displayed in the reverse mode when there is a character string that meets it.