Yaskawa Ladder Works Operation Manual - Manual (Page 78)

3.1 EDITOR OPTION DIALOG
3-8
3.1.6 Key
The allocation of shortcut commands for each instruction is displayed.
(1)
(2)
(3)
(4)
(5)
(1) Key
Each shortcut command as mnemonic key is displayed.
(2) Category
The category of instruction is displayed.
(3) Instruction Name
The instruction name is displayed.
(4) Explanation
The explanation for instruction is displayed.
(5) Default
All settings in the key tab are returned to the default settings.
Change the mnemonic key
1.
Move the cursor to the key to be changed.
2.
Click the key item and it is changed to the edit mode.
3.
Change the key and press the Enter key. This change is effective the next time the ladder
editor is started.
< Key Operation > F2