Yaskawa Ladder Works Operation Manual - Manual (Page 134)

5.5 OPERATION IN LADDER EDITOR
5-20
Input Symbol Data to Ladder Program
1.
Select the specified symbol in the symbol list.
2.
Right-click on it and select Copy(C) of the menu.
3.
Select the instruction that requires the symbol in the ladder program.
4.
Right-click on it, and select Paste(P).
5.
The data of the symbol list is input to the specified instruction in the ladder program.
Notes: The shortcut keys are as follows.
Copy (C) : Ctrl+C, Paste(P) : Ctrl+V
Switch the activated screen using function keys such as F11 and F12. Select F11, and
then the ladder program is activated. Select F12, and then the symbol list is activated.