Yaskawa Ladder Works Operation Manual - Manual (Page 64)

2.7 EDIT OBJECT
2-47
Cut/Paste Multiple Objects
Multiple objects can be cut out and pasted to the another position.
1.
Select the multiple objects and select Edit (E) - Cut (T) of the menu or from the pop-up
menu by the right-click.
< Key Operation >: Ctrl+X
2.
The selected multiple objects are cut out and its information is saved in the clipboard.
3.
Select the pasted position as the guide mark and select Edit (E) - Paste (P) of the menu or
from the pop-up menu by the right-click.
< Key Operation >: Ctrl+V
4.
The result of Cut/Paste operation is displayed.