Yaskawa Ladder Works Operation Manual - Manual (Page 169)

8. LADDER CONVERSION TOOL
8-3
Main Window
Set the ladder conversion conditions.
（2）
（4）
（6）
（7）
（1）
（3） （5）
（8）
（9）
（10）
（11） （12）
（13）
(1) Source
The PLC folder where the ladder conversion tool is started is displayed as a source
PLC folder. It can’t be changed.
(2) Destination
Set the destination PLC folder where the converted program is stored. If there is no
specified PLC folder, it is automatically created.
(3) Reference
Select the destination PLC folder from among the existing PLC folders. This is the
Browse function.
1. Click Reference button.
2. The Select dialog box is displayed.
3. Move to the cursor on the specified PLC folder.
4. Click OK button.
5. The selected PLC folder is input as the destination PLC folder.