Yaskawa Ladder Works Operation Manual - Manual (Page 131)

5.4 OPERATION IN LADDER EDITOR
5-17
5.4.2 Setting of Register Area
The target register area for an automatic address allocation is set.
Setting data can be edited by the menu (cut , copy, paste, and delete).
1.
Input the data to the item.
It is automatically adjusted by inputting either End Address or Size.
2.
The edit menu is selected from Edit (E) of the menu.
3.
Select File (F) - Save (S) of the menu after inputting data.
< key operation >: Ctrl+S
4.
The message is displayed and the setting of register area is completed.