Yaskawa Ladder Works Operation Manual - Manual (Page 60)

2.7 EDIT OBJECT
2-43
Cut /Paste Symbol or Address
1.
Select the cut out symbol or address of instruction and select Edit (E) - Cut (T) of the
menu or from the pop-up menu.
< Key Operation >: Ctrl+X
2.
Select the pasted position as the guide mark and select Edit (E) - Paste (P) of the menu or
from the pop-up menu by the right-click.
< Key Operation >: Ctrl+V
3.
The result of Cut/Paste operation is displayed.