Yaskawa Ladder Works Operation Manual - Manual (Page 69)

2.9 VERIFY PROGRAM
2-52
4.
The display on the tree of the file manager is changed from “Not Compiled File” to
“Compiled File” for the file from which verify was executed.
→ → → →
Error Display Format
When verify is executed, one example of the content of the display of the output window is
shown below.
DWGH¥H ( Rung 0, Step 1, Operand 0, Address): error C1041 : The operand is not available.
(1) (2) (3) (4) (5) (6)
(1) Program Name
The program name where error occurs is displayed.
(2) Rung Number
The rung number where error occurs is displayed.
(3) Step Number
The step number where error occurs is displayed.
When the instruction does not exist on the rung, 0 is displayed.
(4) Operand Information
The number and the type such as the symbol and the address, etc. of operand
information are displayed.
(5) Error Code
The code of each error type to the error is displayed.
(6) Detailed Information
The error detailed content and method of the solution are displayed.