1 configuration – Yaskawa Ladder Works Operation Manual User Manual
Page 3
Advertising
1.1 CONFIGURATION
1-2
1.1 CONFIGURATION
When the new ladder editor method is used, the configuration needs to be set.
1.
Select View(V) - Configuration(C) of the MotionWorks File Manager menu.
2.
“Configuration” dialog box is displayed. Select the Ladder Program tab, and place a check
mark in “Use the new ladder program description”.
3.
Click [OK] button. This setting is available after restarting the File Manager.
Notes: If the new ladder program description is selected, all folders created in the original
Ladder editor are not available.
Advertising