3 typical configuration examples, Ypical, Onfiguration – PLANET WGSW-50040 User Manual
Page 100: Xamples
11-4
1.
Configure the MAC aging-time
Command
Explanation
Global Mode
mac-address-table aging-time
<0|aging-time>
no mac-address-table aging-time
Configure the MAC address aging-time.
2.
Configure static MAC forwarding or filter entry
Command
Explanation
Global Mode
mac-address-table {static | blackhole}
address <mac-addr> vlan <vlan-id >
[interface [ethernet | portchannel]
<interface-name>] |
[source|destination|both]
no mac-address-table {static | blackhole |
dynamic} [address <mac-addr>] [vlan
<vlan-id>] [interface [ethernet |
portchannel] <interface-name>]
Configure static MAC forwarding or filter
entry.
11.3 Typical Configuration Examples
Figure 11-2 MAC Table typical configuration example
Scenario:
Four PCs as shown in the above figure connect to port 1/5、1/7、1/9、1/11 of switch, all the four PCs belong
1/7
1/9
1/11
1/5
PC1
MAC 00-01-11-11-11-11
PC4
MAC 00-01-44-44-44-44
PC3
MAC 00-01-33-33-33-33
PC2
MAC 00-01-22-22-22-22