PLANET WGSW-50040 - Manual (Page 147)

19-4
ip dhcp snooping binding dot1x
no ip dhcp snooping binding dot1x
Enable or disable the DHCP snooping binding
dot1x function.
10． Enable or disable the DHCP SNOOPING binding USER function
Command Explanation
Port mode
ip dhcp snooping binding
user-control
no ip dhcp snooping binding
user-control
Enable or disable the DHCP snooping binding
user function.
11． Add static binding information
Command Explanation
Globe mode
ip dhcp snooping binding user
<mac> address <ipAddr> <mask>
vlan <vid> interface (ethernet|)
<ifname>
no ip dhcp snooping binding user
<mac> interface (ethernet|)
<ifname>
Add/delete DHCP snooping static binding list
entries.
12． Set defense actions
Command Explanation
Port mode
ip dhcp snooping action
{shutdown|blackhole} [recovery
<second>]
no ip dhcp snooping action
Set or delete the DHCP snooping automatic
defense actions of ports.
13． Set rate limitation of data transmission
Command Explanation
Globe mode
ip dhcp snooping limit-rate <pps>
no ip dhcp snooping limit-rate
Set rate limitation of the transmission of DHCP
snooping messages.
14． Enable the debug switch
Command Explanation
Admin mode