PLANET WGSW-50040 - Manual (Page 142)

18-4
host <address> [<mask> |
<prefix-length> ]
no host
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
client-identifier <unique-identifier>
no client-identifier
Specify/delete the unique ID of the user
when binding address manually.
3. Enable logging for address conflicts
Command Explanation
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Enable/disable logging for DHCP address to
detect address conflicts.
Admin Mode
clear ip dhcp conflict <address | all >
Delete a single address conflict record or all
conflict records.
18.3 DHCP Configuration Examples
Scenario 1:
Too save configuration efforts of network administrators and users, a company is using switch as a DHCP
server. The Admin VLAN IP address is 10.16.1.2/16. The local area network for the company is divided into
network A and B according to the office locations. The network configurations for location A and B are shown
below.
PoolA(network 10.16.1.0) PoolB(network 10.16.2.0)
Device IP address Device IP address
Default gateway 10.16.1.200
10.16.1.201
Default gateway 10.16.1.200
10.16.1.201
DNS server 10.16.1.202 DNS server 10.16.1.202
WINS server 10.16.1.209 WWW server 10.16.1.209
WINS node type H-node
Lease 3 days Lease 1day
In location A, a machine with MAC address 00-03-22-23-dc-ab is assigned with a fixed IP address of
10.16.1.210 and named as “management”.
Switch(config)#service dhcp
Switch(config)#interface vlan 1
Switch(Config-Vlan-1)#ip address 10.16.1.2 255.255.0.0
Switch(Config-Vlan-1)#exit
Switch(config)#ip dhcp pool A
Switch(dhcp-A-config)#network 10.16.1.0 24
Switch(dhcp-A-config)#lease 3
Switch(dhcp-A-config)#default-route 10.16.1.200 10.16.1.201