PLANET WGSW-50040 - Manual (Page 168)

22-2
ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan
<vlan-id>
Enable MLD Snooping on specific VLAN. The “no”
form of this command disables MLD Snooping on
specific VLAN.
ipv6 mld snooping vlan <vlan-id>
limit {group <g_limit> | source
<s_limit>}
no ipv6 mld snooping vlan
<vlan-id> limit
Configure the number of the groups in which the MLD
Snooping can join, and the maximum number of
sources in each group. The “no” form of this command
restores to the default.
ipv6 mld snooping vlan <vlan-id>
l2-general-querier
no ipv6 mld snooping vlan
<vlan-id> l2-general-querier
Set the VLAN level 2 general querier, which is
recommended on each segment. The “no” form of this
command cancels the level 2 general querier
configuration.
ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface
–name>
no ipv6 mld snooping vlan
<vlan-id> mrouter-port interface
<interface –name>
Configure the static mrouter port in specific vlan. The
“no” form of this command cancels the mrouter port
configuration.
ipv6 mld snooping vlan <vlan-id>
mrpt <value>
no ipv6 mld snooping vlan
<vlan-id> mrpt
Configure the keep-alive time of the mrouter port. The
“no” form of this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no ipv6 mld snooping vlan
<vlan-id> query-interval
Configure the query interval. The “no” form of this
command restores to the default.
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan
<vlan-id> immediate-leave
Configure immediate leave multicast group function for
the MLD Snooping of specific VLAN. The “no” form of
this command cancels the immediate leave
configuration.
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no ipv6 mld snooping vlan
<vlan-id> query-mrsp
Configure the query maximum response period. The
“no” form of this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no ipv6 mld snooping vlan
<vlan-id> query-robustness
Configure the query robustness, the “no” form of this
command restores to the default.
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan
<vlan-id> suppression-query-time
Configure the suppression query time. The “no” form
of this command restores to the default
Ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
Configure static-group on specified port of the VLAN.
The no form of the command cancels this