PLANET WGSW-50040 - Manual (Page 85)

10-6
10.2.2 GVRP Configuration Task List
1. Configuring GARP Timer parameters
Command Explanation
Port Mode
garp timer join <timer-value>
no garp timer join
garp timer leave <timer-value>
no garp timer leave
garp timer hold <timer-value>
no garp timer hold
Configure the hold, join and
leave timers for GARP.
Global Mode
garp timer leaveall <timer-value>
no garp timer leaveall
Configure the leave all timer for
GARP.
2. Enable GVRP function
Command Explanation
Port Mode
gvrp
no gvrp
Enable/disable the GVRP
function on current port.
Global Mode
gvrp
no gvrp
Enable/disable the GVRP
function for the switch.