PLANET WGSW-50040 - Manual (Page 130)

15-3
ipv6 address
<ipv6-address/prefix-length>
[eui-64]
no ipv6 address
<ipv6-address/prefix-length>
Configure IPv6 address, including aggregatable
global unicast addresses, site-local addresses
and link-local addresses. The no ipv6 address
<ipv6-address/prefix-length> command
cancels IPv6 address.
(2) Configure default gateway
Command Explanation
Interface Configuration Mode
ipv6 default-gateway
<ipv6-address>
no ipv6 default-gateway
<ipv6-address>
Configure the default IPv6 gateway address; the
no command deletes the default IPv6 gateway
address.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Command Explanation
Interface Configuration Mode
ipv6 nd dad attempts <value>
no ipv6 nd dad attempts
Set the neighbor query message number sent in
sequence when the interface makes duplicate
address detection. The no command resumes
default value (1).
(2) Configure Send Neighbor solicitation Message Interval
Command Explanation
Interface Configuration Mode
ipv6 nd ns-interval <seconds>
no ipv6 nd ns-interval
Set the interval of the interface to send neighbor
query message. The NO command resumes
default value (1 second).
(3) Enable and disable router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Forbid IPv6 Router Advertisement. The NO
command enables IPv6 router advertisement.
(4) Configure Router Lifespan
Command Explanation
Interface Configuration Mode