PLANET WGSW-50040 - Manual (Page 131)

15-4
ipv6 nd ra-lifetime <seconds>
no ipv6 nd ra-lifetime
Configure Router advertisement Lifespan. The
NO command resumes default value (1800
seconds).
(5) Configure router advertisement Minimum Interval
Command Description
Interface Configuration Mode
ipv6 nd min-ra-interval <seconds>
no ipv6 nd min-ra-interval
Configure the minimum interval for router
advertisement. The NO command resumes
default value (200 seconds).
(6) Configure router advertisement Maximum Interval
Command Explanation
Interface Configuration Mode
ipv6 nd max-ra-interval <seconds>
no ipv6 nd max-ra-interval
Configure the maximum interval for router
advertisement. The NO command resumes
default value (600 seconds).
(7) Configure prefix advertisement parameters
Command Explanation
Interface Configuration Mode
ipv6 nd prefix
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime> [off-link]
[no-autoconfig]
no ipv6 nd prefix
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime> [off-link]
[no-autoconfig]
Configure the address prefix and advertisement
parameters of router. The NO command cancels
the address prefix of routing advertisement.
(8) Configure static IPv6 neighbor Entries
Command Explanation
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
<hardware-address> interface
<interface-type interface-number>
Set static neighbor table entries, including
neighbor IPv6 address, MAC address and
two-layer port.
no ipv6 neighbor <ipv6-address> Delete neighbor table entries.