PLANET WGSW-50040 - Manual (Page 107)

12-4
2. Configure instance parameters
Command Explanation
Global Mode
spanning-tree mst <instance-id> priority
<bridge-priority>
no spanning-tree mst <instance-id>
priority
Set bridge priority for specified instance.
spanning-tree priority <bridge-priority>
no spanning-tree priority
Configure the spanning-tree priority of the
switch.
Port Mode
spanning-tree mst <instance-id> cost
<cost>
no spanning-tree mst <instance-id> cost
Set port path cost for specified instance.
spanning-tree mst <instance-id>
port-priority <port-priority>
no spanning-tree mst <instance-id>
port-priority
Set port priority for specified instance.
spanning-tree mst <instance-id>
rootguard
no spanning-tree mst <instance-id>
rootguard
Configure currently port whether running
rootguard in specified instance, configure
the rootguard port can’t turn to root port.
spanning-tree rootguard
no spanning-tree rootguard
Configure currently port whether running
rootguard in instance 0, configure the
rootguard port can’t turn to root port.
3. Configure MSTP region parameters
Command Explanation
Global Mode
spanning-tree mst configuration
no spanning-tree mst configuration
Enter MSTP region mode. The no
command restores the default setting.
MSTP region mode
instance <instance-id> vlan <vlan-list>
no instance <instance-id> [vlan <vlan-list>]
Create Instance and set mapping
between VLAN and Instance.
name <name>
no name
Set MSTP region name.
revision-level <level>
no revision-level
Set MSTP region revision level.
abort
Quit MSTP region mode and return to
Global mode without saving MSTP
region configuration.
exit
Quit MSTP region mode and return to
Global mode with saving MSTP region
configuration.