PLANET WGSW-50040 - Manual (Page 187)

24-16
[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} |
any-source | {host-source <sIPv6Addr> }}
Creates a standard
name-based IPV6 access
rule; the no form command
deletes the name-based
standard IPV6 access rule.
c. Exit name-based standard IP ACL configuration mode
Command Explanation
Standard IPV6 ACL Mode
exit Exits name-based standard
IPV6 ACL configuration
mode.
2. Configuring packet filtering function
(1) Enable global packet filtering function
Command Explanation
Global Mode
firewall enable
Enables global packet
filtering function.
firewall disable
Disables global packet
filtering function.
(2) Configure default action.
Command Explanation
Global Mode
firewall default {permit |deny}
Sets default action to
firewall.
3. Configuring time range function
（1）Create the name of the time range
Command Explanation
Global Mode
time-range <time_range_name>
Create a time range named
time_range_name.
no time-range <time_range_name>
Stop the time range function
named time_range_name.
（2）Configure periodic time range
Command Explanation