ProSoft Technology MVI56-103M - Manual (Page 115)

MVI56-103M ♦ ControlLogix Platform Reference
IEC 60870-5-103 Master Communication Module User Manual
ProSoft Technology, Inc. Page 115 of 152
February 22, 2013
Status
Table
Word
Parameter Description
21 Cmd Queue
Count This word contains the number of active commands in the command
queue for the module. Up to 100 commands can be buffered in this
queue. These commands are transferred from the processor to the
module using special command blocks.
22 to 23 Online Status This double word value contains a bit for each of the 32 potential
sessions in the module. If the bit is set for a session in the double
word, the station is online. If the bit is clear, the station is offline. Use
this value to determine if commands sent from the processor will have
a chance of succeeding.
24 CH 0 State This word contains the state machine value for Port 0.
25 Cmd Req This word contains the number of commands transferred out Port 0.
26 Cmd Resp This word contains the number of command response messages
received on Port 0.
27 Cmd Err This word contains the number of command errors recognized on Port
0.
28 Requests This word contains the total number of messages transmitted on Port
0.
29 Responses This word contains the total number of messages received on Port 0.
30 Err Sent This word contains the number of error messages sent on Port 0.
31 Err Received This word contains the number of error messages received on Port 0.
32 Cfg Err This bit mapped word recognizes any configuration errors for Port 0.
Refer to the configuration error word table for a definition of each bit.
33 Current Error This word contains the error code for the current command executing
on Port 0.
34 Last Error This word contains the error code for the last error recognized on Port
0.
35 CH 1 State This word contains the state machine value for Port 1.
36 Cmd Req This word contains the number of commands transferred out Port 1.
37 Cmd Resp This word contains the number of command response messages
received on Port 1.
38 Cmd Err This word contains the number of command errors recognized on Port
1.
39 Requests This word contains the total number of messages transmitted on Port
1.
40 Responses This word contains the total number of messages received on Port 1.
41 Err Sent This word contains the number of error messages sent on Port 1.
42 Err Received This word contains the number of error messages received on Port 1.
43 Cfg Err This bit mapped word recognizes any configuration errors for Port 1.
Refer to the configuration error word table for a definition of each bit.
44 Current Error This word contains the error code for the current command executing
on Port 1.
45 Last Error This word contains the error code for the last error recognized on Port
1.