ProSoft Technology MVI56-103M User Manual
Page 93
MVI56-103M ♦ ControlLogix Platform
Reference
IEC 60870-5-103 Master Communication Module
User Manual
ProSoft Technology, Inc.
Page 93 of 152
February 22, 2013
RS-232 Configuration/Debug Port
This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is
included with the module. This port permits a PC based terminal emulation
program to view configuration and status data in the module and to control the
module. The cable for communications on this port is shown in the following
diagram:
RS-232 Application Port(s)
When the RS-232 interface is selected, the use of hardware handshaking
(control and monitoring of modem signal lines) is user definable. If no hardware
handshaking will be used, here are the cable pinouts to connect to the port.
RS-232: Modem Connection (Hardware Handshaking Required)
This type of connection is required between the module and a modem or other
communication device.