ProSoft Technology MVI56-103M - Manual (Page 25)

MVI56-103M ♦ ControlLogix Platform Configuring the MVI56-103M Module
IEC 60870-5-103 Master Communication Module User Manual
ProSoft Technology, Inc. Page 25 of 152
February 22, 2013
2.1.1 Editing the Configuration File
The DNPSNET_Q.CFG file consists of the following sections:
 [Module]
 [Backplane Configuration]
 [DNP ENET Slave]
 [DNP ENET IP Addresses]
 [DNP Slave Binary Inputs]
 [DNP Slave Analog Inputs]
 [DNP Slave Float Inputs]
 Important notes to consider when editing the sample configuration file:
 Comments within the file are preceded by the pound (#) sign. Any text on a
line that occurs after the # character will be ignored.
 Do not use tabs or other non-printing characters instead of spaces to
separate parameters (spacebar).
 Parameter names must begin in the first column of a line, and may not be
preceded with a space (spacebar) or other non-printing character.
The IEC103M.CFG file is a plain ASCII text file. Use a text editor such as
Notepad.exe (included with Microsoft Windows) to open and edit the file.
To open the configuration file in Notepad
1 Click the S TART button, and then choose P ROGRAMS
2 Expand the Programs menu, and then choose A CCESSORIES .
3 On the Accessories menu, choose N OTEPAD .
4 In Notepad, open the F ILE menu, and then choose O PEN