ProSoft Technology MVI56-103M - Manual (Page 73)

MVI56-103M ♦ ControlLogix Platform Diagnostics and Troubleshooting
IEC 60870-5-103 Master Communication Module User Manual
ProSoft Technology, Inc. Page 73 of 152
February 22, 2013
Warm Booting the Module
Press [W] from the Main menu to warm boot (restart) the module.
This command will cause the program to exit and reload, refreshing configuration
parameters that must be set on program initialization. Only use this command if
you must force the module to reboot.
4.1.5 Database View Menu
Press [D] from the Main menu to open the Database View menu. Use this menu
command to view the current contents of the module database. Press [?] to view
a list of commands available on this menu.
Jumping to the first page of Memory Addresses 0, 1000, 2000, or 3000
The database is divided into pages that correspond with a specific number of
registers. The total number of database pages and registers depends on the
memory capacity and configuration of the module.
Use the keyboard commands [0], [1], [2], or [3] to display database contents
starting from address 0 (zero), 1000, 2000 and 3000 respectively.
Moving Back Through 5 Pages of Registers
Press [-] from the Database View menu to skip five pages back in the database
to see the 100 registers of data starting 500 registers before the currently
displayed page.
Viewing the Previous Page of Registers
Press [P] from the Database View menu to display the previous page of data.
Moving Forward Through 5 Pages of Registers
Press [+] from the Database View menu to skip five pages ahead in the database
to see 100 registers of data 500 registers ahead of the currently displayed page.